The Hyundai D6CA engine is an in-line 6-cylinder diesel engine with a volume of 12,920 cc 3 with a capacity of up to 440 hp, with a turbocharger. Installed on HD320 / 370, HD700, HD1000 cars and Aero Town buses. Hyundai engines are manufactured at several factories in South Korea, China, India, Turkey, Slovakia and the USA. Hyundai cars are supplied to the post-Soviet market mainly with engines assembled in China, Korean and American engines for the most part remain in the domestic markets.
Car engines and transmissions
Engine Hyundai D6CA
Engine Mercedes OM906LA
High power traction motors are required for transporting heavy loads or when driving on rough roads. For these purposes, 6-cylinder in-line engines of the OM906LA series, produced in modifications from 210 to 300 hp, are the best suited. Thanks to the wide range and low minimum level of 1200 rpm, there is more efficient gear shifting and fuel economy. Continue reading Engine Mercedes OM906LA
Engine MAN D2156
MAN D2156 – engine of joint Hungarian-German production on diesel fuel with direct injection of a combustible mixture and water cooling.
Continue reading Engine MAN D2156
Engine Mercedes OM460LA
Modern engines must meet several requirements: to be economical, efficient, reliable and environmentally friendly. All these conditions are met by the Mercedes OM 460 engines. These engines are fully electronically controlled, which significantly increases their efficiency. The Mercedes OM460LA is a six-cylinder engine with separate injection pumps that deliver high-pressure fuel to ensure low diesel consumption. These motors are equipped with an energy efficient compressor that consumes less power than compressors of the same type. Continue reading Engine Mercedes OM460LA
Engine Mercedes OM926LA
Diesel engine manufactured by Mercedes-Benz. The engine is a four-stroke and has a displacement of 7201 cubic centimeters, which corresponds to 435 cubic inches. It is one of a series of 900 engines that began development after the crisis in the 1980s to replace the 300 series engines. Continue reading Engine Mercedes OM926LA
Engine MAN D2876
The MAN D 2876 series engines offer outstanding performance. High tractive power even at low speeds, high efficiency due to low fuel consumption. Powerful acceleration and quick response to commands, low operating costs and long service life, high efficiency combined with low weight, compact design, worldwide service network with fast delivery of spare parts. Continue reading Engine MAN D2876
Engine Hyundai D6BR
The Hyundai D6BR is a six-cylinder in-line diesel engine manufactured by the Hyundai Motor Company. Turbocharging is available in almost all D6BR engine variants, with the exception of some models used on short trucks and small buses. Continue reading Engine Hyundai D6BR
Engine DAF WS 282
Diesel engine DAF WS 282 with a capacity of 384 horsepower, 282 kW. This V-shaped DAF engine has 6 cylinders with a volume of 11.6 liters with 12 valves. Fits on DAF 95 FA 95.380, DAF 95 FAT 95.380, DAF 95 FT 95.380, DAF 95 FAC 95.380.
Engine Nissan ZD30
ZD30DDTi and ZD30DD are fairly well-known diesels manufactured by Nissan. The concern started designing them in the second half of the 90s, but started active production only in 1999 and 2000. At first, these units had a lot of flaws, so they were seriously criticized by the automotive community. Continue reading Engine Nissan ZD30
Engine YaMZ 236
The YaMZ-236 engine is the first of the V-shaped power units of YaMZ, before it the Yaroslavl Motor Plant produced only in-line engines: 4-cylinder YaAZ-204 and 6-cylinder YaAZ-206. Since the layout of the new engine was found to be more successful, the production of in-line models of the old model was discontinued in the eighties of the last century. All the remaining V-shaped diesel engines YaMZ, this is only the development of the design developments laid down in the design of the YaMZ-236 engine.
Continue reading Engine YaMZ 236