Descriptions and technical characteristics of engines for the most popular car models.
The 2.0-liter diesel engine Mazda RF-T DI or 2.0 DiTD was produced from 1998 to 2004 and was installed on the most popular models of the company of its time, such as 323, 626 or Premacy. In total, there were three different modifications of this power unit: RF2A, RF3F and RF4F.
The Mazda RF5C 2.0-liter turbo diesel engine was assembled by the company from 2002 to 2005 and was installed only on European versions of the 6 series models and the popular MPV minivan. After a slight modernization in 2005, this power unit received a new RF7J index.
The 2.0-liter Mazda RF7J diesel engine was produced by the company from 2005 to 2010 and was installed on the European versions of the popular models of the third, fifth or sixth series. This power unit was essentially a modernized version of the well-known RF5C diesel engine.
The 2.2-liter prechamber diesel engine Mazda R2 was produced from 1983 to 2007 and was installed on a large number of commercial vehicles under the brands Mazda, Kia, Ford. After being equipped with the Common Rail system, this power unit received a new R2AA index.
The 2.2-liter Mazda R2AA diesel engine was produced by the company from 2008 to 2013 and was installed on such popular models as the third and sixth series, as well as the CX-7 crossover. There was a version of this diesel engine with power reduced to 125 hp under the R2BF index.
The 1.4-liter Mazda Y4 or 1.4 CiTD diesel engine was produced from 2003 to 2009 and was installed on the first and second generations of the popular compact model under the index 2. This unit exists in one version of the Y404 and is a variation of the Peugeot 1.4 HDi engine.
The 1.6-liter Mazda Y6 or 1.6 CiTD engine was produced from 2004 to 2015 in two versions: the first generation units with the Y406, Y601, Y642 and Y646 indices were equipped with a 16-valve cylinder head, and the second generation engines with the Y650, Y655, Y661 and Y6Y1 indices equipped with an 8-valve cylinder head.
The Mazda WL-T 2.5-litre turbo diesel engine was built in Japan from 1995 to 2006 and fitted to rear and all-wheel drive models such as the MPV, Bongo Friendee and Proceed Marvie. Modifications of this power unit with an electronically controlled high pressure fuel pump are often referred to as WL‑TE.
The Mazda SH-VPTS or Skyactiv-D 2.2-liter diesel engine has been assembled at the plant in Japan since 2013 and is installed on the most popular CX-5 and CX-8 crossovers in the production range. A similar diesel engine is installed on passenger models of the Japanese company, but with the SH-VPTR index.
The 1.8-liter Mazda S8-DPTS or Skyactiv-D 1.8 diesel engine was first introduced only in 2018 and is installed only on the latest generation of the Mazda 3 model, as well as the CX-3 and CX-30 crossovers. There is a diesel version under the S8-DPTR index, equipped with the i-ELOOP recovery system.
The Mazda S5-DPTS or Skyactiv-D 1.5-liter diesel engine was introduced at the 2014 auto show and has since been installed in the most compact Demio or Mazda 2 model, as well as the CX-3 crossover. There is a modification of this diesel engine with the i-ELOOP recovery system under the S5-DPTR index.
The 2.2-liter Honda N22B diesel engine was produced by the company from 2008 to 2015 and was installed on European versions of such popular models as the Civic, Accord or CR-V. This power unit was offered in two different versions with a capacity of 150 or 180 hp.
The 2.2-liter Honda N22A diesel engine was produced by the concern from 2002 to 2010 and was installed on European versions of such popular models as Accord, Civic, CR-V or FR-V. There are many modifications of this unit, but they differ little from each other.
The 1.6-liter Honda N16A diesel engine has been produced by the Japanese concern since 2013 and is installed on European versions of the popular Civic model and CR-V and HR-V crossovers. There are two modifications of this unit: with one turbine for 120 hp and with two for 160 hp.
The 2.0-liter Honda R20A gasoline engine has been assembled by the Japanese concern since 2006 and is installed on a number of popular models of the company, such as the Civic, Accord or the CR-V crossover. This unit is available in several modifications, which differ little from each other.
The 1.8-liter Honda R18A gasoline engine was produced by the concern from 2005 to 2014 and was installed on such mass models of the company as the Civic, City, FR-V or the Stream minivan. Now this power unit has already been replaced by its upgraded version under the R18Z index.
The 1.5-liter Honda L15B gasoline engine has been produced at factories in Japan since 2013 and is installed on a number of modern models of the concern, such as the Fit, City, Civic and Accord. The unit is offered in two versions: atmospheric with injector and turbo with direct injection.
The 1.5-liter Honda L15A engine has been produced at the company’s plant in Japan since 2001 and is installed on such popular compact models of the concern as the Jazz, Fried or City. Three modifications of the L15A unit are offered: 8-valve i-DSI and 16-valve VTEC and iVTEC.
The 1.3-liter Honda L13B gasoline engine has been produced at the Japanese plant since 2011 and so far is only installed on the third generation of the popular Jazz model (Fit in some markets). This power unit belongs to the latest family of Honda Earth Dreams Engines.
The 1.3-liter Honda L13A gasoline engine has been produced at the concern’s factories since 2001 and is installed on many compact models of the company, such as the Fit, Brio, City and Civic. There are two different versions of the powertrain: 8-valve i-DSI and 16-valve i-VTEC.
The 2.4-liter Honda K24A gasoline engine was produced by the concern from 2001 to 2016 and was installed on a number of popular models of the company, such as the Accord, Element or Odyssey minivan. This power unit was offered both in civilian versions and sports modifications.
The 2.3-liter gasoline turbo engine Honda K23A or K23A1 was assembled from 2006 to 2012 and was exclusively installed only on the first generation Acura RDX luxury crossover. This power unit is famous for its reliability and excellent dynamic performance.
The 2.0-liter Honda K20A gasoline engine was produced by the company from 2000 to 2011 and was installed on such popular concern models as the Accord, Civic and Stream minivan. This power unit had a rather impressive number of different versions and modifications.
Honda’s J37A 3.7-liter V6 engine was produced at a facility in the US from 2006 to 2014 and was installed in the largest and most expensive Legend sedan and many Acura models. This motor existed in five modifications, which did not differ much from each other.
Honda’s J35A 3.5-liter V6 engine was produced at a facility in the United States from 1998 to 2012 and was installed on a number of major models of the concern, including cars under the Acura brand. It was the modification of this unit that was the first to receive the VCM cylinder deactivation system.
The Honda J32A 3.2-liter V6 gasoline engine was produced in the USA from 1998 to 2008 and was installed on the third generation Inspire and many models manufactured under the Acura brand. This power unit existed in three modifications, which differed in power.
Honda’s J30A 3.0-liter V6 engine was produced at the US plant from 1997 to 2007 and was installed in a number of popular models of the company, such as the Accord and the Odyssey minivan. After a slight modernization, this unit went to conquer the Chinese market as the J30Y1.
The 2.5-liter V6 Honda J25A engine was produced at the American plant from 1998 to 2003 and was installed only on the popular third-generation Inspire model or its counterpart Saber. This motor is considered the rarest in the extensive family of J-series V-shaped motors.
The 2.3-liter Honda H23A engine was assembled at the company’s Japanese plant from 1992 to 2002 and installed on some modifications of the fourth-generation Accord and Prelude models. There were two versions of the motor: with a black cover without VTEC and charged with a blue cover.
The 2.2-liter Honda H22A engine was produced at an enterprise in Japan from 1991 to 2002 and was installed on sports modifications of the Accord model or the popular Prelude coupe. The motor was offered in a couple of versions: less powerful with a black cover and more powerful with a red one.
The 2.5-liter Honda G25A engine was produced at a Japanese company from 1989 to 1998 and was installed on such large models of the company as Inspire, Rafaga, Ascot, Vigor, Saber. A well-known legend says that this engine was created from the power unit of a Formula 1 car.
The 2.0-liter Honda G20A gasoline engine was produced in Japan from 1989 to 1998 and was installed on a number of large models of the concern, such as Ascot, Rafaga, Saber, Inspire and Vigor. This power unit, according to a generally accepted legend, was created on the basis of a Formula 1 car engine.
The 2.3-liter Honda F23A gasoline engine was produced by the company from 1997 to 2003 and was installed on such popular models of the Japanese concern as the Accord or the Odyssey minivan. They offered two different modifications of the F23A motor: with and without the VTEC phase control system.
The 2.2-liter Honda F22B engine was produced at the company’s plant in Japan from 1991 to 1997 and installed on popular concern models such as the Accord, Prelude or Odyssey minivan. The F22B power unit was produced in SOHC and DOHC modifications, with and without the VTEC system.
The 2.0-liter Honda F20C engine was assembled at the company’s plant in Japan from 1999 to 2009 and was exclusively installed only on the popular sports model with the S2000 index. For a naturally aspirated powertrain, this motor has outstanding power per liter.
The 2.0-liter Honda F20B engine was assembled at the company’s Japanese plant from 1993 to 2002 and installed on various modifications of the popular fourth and fifth generation Accord models. The F20B power unit was produced in SOHC and DOHC versions, as well as with and without the VTEC system.
The 2.0-liter Honda F20A gasoline engine was produced by the concern from 1989 to 2002 and was installed on a number of popular models of the Japanese company, primarily on the Accord and Prelude. There were three carburetor and five injection modifications of the F20A power unit.
The 1.8-liter Honda F18B gasoline engine was produced by the company from 1993 to 2002 and was installed in the fifth and sixth generations of the very popular worldwide Accord model. The F18B motor is found in a single modification, however, with varying degrees of forcing.
The 1.7-liter Honda D17A gasoline engine was produced by the company from 2000 to 2007 and was installed on such popular models of the Japanese concern as the Civic, FR-V or the Stream minivan. D17A power units are divided into two groups, some were equipped with a VTEC system, while others were not.
The 1.6-liter Honda D16A engine was assembled at the concern’s enterprises from 1986 to 1995 and was installed on a number of such popular company models as the Civic, Integra or Concerto. The D16A motor existed in many versions, but they are divided into two groups: with SOHC and DOHC cylinder heads.
The 1.5-liter Honda D15B gasoline engine was produced by the concern from 1987 to 2005 and was installed on many popular models of the company, and above all on the four generations of the Civic. There were versions of D15B with a carburetor and an injector, with 8 or 16-valve cylinder heads, and also with …
The 1.4-liter Honda D14A gasoline engine was produced by the concern from 1987 to 2000 and was installed on European modifications of the popular Civic model of three generations at once. The D14A motor was produced in a version with a carburetor, single injection and a classic injector.
The 1.3-liter Honda D13B gasoline engine was produced in Japan from 1988 to 2002 and was installed on such popular models of the company as City, Logo and three generations of Civic. The D13B motor was produced in a version with a carburetor and an injector, with a cylinder head for 8 and 16 valves.
The 3.5-liter gasoline V6 Honda C35A engine was produced by the concern from 1995 to 2004 and was installed on the third generation of the Legend model or its counterpart under the name Acura RL. There were five modifications of this motor, which did not differ much from each other.
The 3.2-liter V6 Honda C32A engine was produced at the concern’s factories from 1990 to 1999 and was installed on the second generation of Legend models, Inspire and analogues under the Acura brand. In addition to standard engine modifications for 200 – 205 hp, there was a Type 2 version with 230 hp.
The 2.7-liter V6 Honda C27A engine was produced by the company from 1987 to 1997 and was installed on the first generation of the popular Legend model, the fifth Accord and the Rover 827. There were several versions of the unit: with and without a variable intake geometry system.
The B20B engine is Honda’s most popular and largest B-series engine. The representatives of this series are based on an aluminum cylinder block with steel liners. The engine has a twin-shaft head with sixteen valves. It uses a timing belt that requires timely replacement to avoid breaking it. The engine does not have hydraulic lifters, …
Unlike the B18B, on which the manufacturer experimented without using VTEC, Honda decided to add VTEC to the 1.8-liter engine for the B18C. The release of the B18C engine marked the emergence of a new generation of engines with “motorcycle” characteristics, when more than 100 hp were obtained from one liter of volume, and which …
The 1.8-liter Honda B18B gasoline engine was produced in Japan from 1992 to 2000 and was installed on several popular models of the company, primarily Civic and Integra. The B18B motor exists in four modifications, which are slightly different from each other.
The 1.6-liter Honda B16B engine was produced at a Japanese company from 1997 to 2000 and was exclusively installed only on the Civic Type R sports model and only in the EK9 body. The B16B motor had the highest boost rate of 110 hp per 1 liter for its time.
Honda first released the legendary B16 series engine in 1989. It was a B16A engine with two camshafts and Honda’s proprietary valve timing system – VTEC. The engine was installed on the Japanese model Honda Integra. This is the first engine in which Honda has used the proprietary VTEC system. It was from this moment …
The 2.2-liter Ford 2.2 TDCi diesel engines were produced by the company from 2006 to 2018 and were installed on a number of popular models under the Ford, Land Rover and Jaguar brands. In fact, these power units are clones of the Peugeot DW12MTED4 and DW12CTED4 engines.
The 1.6-liter Ford 1.6 TDCi diesel engines were produced by the concern from 2004 to 2017 in two different generations: the first with a 16-valve cylinder head and the second with an 8-valve cylinder head. These diesels are known as Peugeot 1.6 HDi, Mazda 1.6 CiTD, Volvo D4162T and D4164T in other cars.
The 1.5-liter 8-valve Ford 1.5 TDCi diesel engines were introduced only in 2012 as a further development of the 1.6 TDCi series engines, developed jointly with the PSA concern. However, Peugeot-Citroen switched to their own line of 16-valve 1.5 HDi diesels.
The 1.4-liter Ford 1.4 TDCi or DLD-414 diesel engines were produced from 2002 to 2014 and were installed on models such as the Fiesta and Fusion, as well as on the Mazda 2 under the Y404 index. This diesel engine was created jointly with the Peugeot-Citroen concern and is completely similar to the Peugeot 1.4 …
The 1.8-liter Ford C9DA, C9DB, C9DC or 1.8 Endura-DI engine was assembled from 1999 to 2004 and installed on the very first generation of the Focus model in versions before and after restyling. This unit, unlike a number of predecessors, has become widespread.
The 1.8-liter Ford BHDA, BHDB or 1.8 Endura-DI engine was produced from 1999 to 2004 and was installed on the first generation of the popular Focus model in all its many bodies. This power unit is not so common, unlike its 90-horsepower modification.
The 1.8-liter Ford RTP, RTN, RTQ or 1.8 Endura-DI engine was produced from 1999 to 2002 and was installed only on the fourth generation of the Fiesta model in the restyled version. This diesel power unit, unlike its predecessor, has proven itself well.
The 1.8-liter Ford RFN, RFM or 1.8 Endura DE engine was produced from 1993 to 2000 and was installed in the first two generations of the very popular Mondeo model. This power unit had a bad reputation primarily because of its low reliability.
The 1.8-liter Ford RFA / RFB or 1.8 Endura-DE engine was produced from 1990 to 1993 and was installed on the second generation of the popular Sierra model in the restyled version. This power unit had low reliability, which earned it a bad reputation.
The 1.8-liter diesel engine Ford RVA or 1.8 Endura-DE was assembled from 1995 to 1998 and was installed on the sixth generation of the Escort model, in a number of sources it is considered the seventh. The motor was not famous for its reliability, but it had a simple design and good repairability.
The 1.8-liter Ford RTK / RTJ or 1.8 Endura DE engine was produced from 1995 to 2000 and was installed on the fourth generation of the popular Fiesta model, in the pre-facelift version. This diesel engine is not very reliable, but it is repairable due to its simple design.
The 2.4-liter Ford JXFA engine or 2.4 TDCi Duratorq Puma was produced from 2006 to 2014 and was installed on the seventh (in some sources, the fourth) generation of Transit minibuses. This diesel unit was part of the Common Rail series of engines with power from 100 to 140 hp.
The 2.2-liter Ford QJBB, QJBA or 2.2 TDCi Duratorq engine was produced from 2004 to 2007 and was installed only on expensive modifications of the third generation of the Mondeo model. The motor is known for frequent problems with the Delphi common rail fuel system.
The 2.0-liter Ford FMBA or 2.0 TDCi Duratorq engine was produced from 2002 to 2007 and was installed on the third generation of the very popular Mondeo model. This unit was disliked due to the vagaries of the Delphi Common Rail fuel system.
The 2.2-liter Ford KNWA engine or 2.2 TDCi Duratorq DW was produced from 2010 to 2015 and was installed only on charged versions of the popular Galaxy and S-MAX minivans. This unit is actually just one of the options for the French diesel DW12CTED4.
The 2.2-liter Ford Q4BA or 2.2 TDCi Duratorq DW engine was produced from 2008 to 2010 and was installed only on the top trim levels of the fourth Mondeo in the pre-facelift version. The unit is inherently a type of French diesel engine DW12BTED4.
The 2.0-liter Ford TXDA or 2.0 TDCi Duratorq DW engine was produced from 2010 to 2012 and was installed only on the first generation of the popular Kuga crossover after restyling. This power unit was essentially a clone of the famous French diesel engine DW10CTED4.
