Engine Volvo D6A210
The Volvo D6A210 are versatile engines that have found applications in the heavy industry for land transport and as marine engines.
Volvo manufactures commercial vehicles, trucks, buses, engines and various equipment. Truck engines from this Swedish company are characterized by high power, low fuel consumption and excellent performance.
The company’s motors generally have a six-character index plus a suffix:
At the end there is a numerical suffix that distinguishes engines similar in indexes.
The Volvo D6A210 are versatile engines that have found applications in the heavy industry for land transport and as marine engines.
The D13A400 engine is a 12.8 liter, 6-cylinder in-line diesel engine with an overhead camshaft, 4 valves per cylinder and unit injectors. Designed for heavy freight transport, also suitable for construction work. This engine has low fuel consumption, good driving characteristics.
The D12D420 is a 420 hp, 12-liter, in-line 6-cylinder, turbocharged, intercooled diesel engine. This engine meets the Euro 3 emission requirements. Volvo manufactures D12D engines at a new plant, where the maximum automation of the production process is implemented.
The Volvo D16E540 engine is a 16.1 liter, 6-cylinder in-line diesel engine equipped with a turbocharger and intercooler. Power 540 HP The engine complies with the EU emission requirements of the Euro 4 standard.
The Volvo D7F290 engine is a 7.2 liter, in-line, 6-cylinder, turbocharged, intercooled diesel engine. Engine power – 290 HP, torque – 1070 Nm. The engine meets the requirements of the US for the level of toxicity of exhaust gases of the Euro-5 standard.
The D13C420 engine is a 12.8 liter, 6-cylinder in-line diesel engine with overhead camshaft, 4 valves per cylinder and pump injectors. One of the advantages of this engine is its compliance with EC requirements for emission level of exhaust gases Euro 5. D13C420 is intended for transportation of heavy loads over long distances and for …
The Volvo D13A480 is a turbocharged, intercooled engine with a single cylinder head, overhead camshaft and electronic fuel injection.
The Volvo D13A520 engine is a 12.8 liter, 6-cylinder in-line engine with an overhead camshaft, 4 valves per cylinder and unit injectors. The engine complies with the EU Euro-3 emission standard. Equipped with turbocharger and intercooler, single cylinder head and electronic fuel injection system.
The D7F240 is a 7.2-liter in-line 6-cylinder diesel engine. The engine complies with EU Euro 5 emission standards. The engine is equipped with a Diesel Particulate Filter (DPF), which traps microscopic soot particles in the exhaust gases and then burns them back during the regeneration process, leaving only fine ash.
The Volvo D7B260 engine is one of the latest engine models from the Swedish manufacturer. These are universal units that are used in heavy industry, as marine engines and for land transportation of goods. The in-line arrangement of the cylinders greatly simplifies service, reducing the time required for diagnostics and testing the functionality of mechanisms.
The Volvo D12A380 engine is a water-cooled 6-cylinder in-line engine produced since 1993. The engine power is 380 hp. (279 kW) with an engine volume of 12100 cc (12.1 liters).
The Volvo D6A250 engine is a 6 liter engine. This engine is universal – it can be equipped with heavy industrial, cargo and marine equipment.
The Volvo D6A180 engine is a liquid-cooled, 6-cylinder in-line diesel power unit with a displacement of 5.5 liters (5480 cm3) with electronic fuel delivery. Develops a power of 180 hp. (132 kW) and 575 Nm of torque.
Volvo D7C290 engines are equipped with an efficient fuel system with unit injectors per cylinder for low fuel consumption. In this case, the fuel is supplied under high pressure, which increases the efficiency of its combustion. In addition, optimal combustion results in a reduction in exhaust gases to the level of compliance with modern environmental …
The Volvo D12A340 engine is a 12 liter engine. 6-cylinder, has 4 valves per cylinder, with a piston stroke of 150 mm and a cylinder diameter of 131 mm. Produced since 1993. to 1995 for Volvo FH 12.
The D12C380 engine is a water-cooled, 6-cylinder in-line diesel engine that has been in production since 1998. The engine power index is an impressive 31 hp. for 1 liter (1000 cc) volume.
The Volvo D16A 520 engines use advanced technologies (new design of turbocharger, heat exchanger), which allow the units to consume less engine oil, fuel and reduce the time and money spent on maintenance. Highly precise control of combustion process, air flow and injection algorithm provides higher fuel efficiency.
The 6-cylinder D7F260 engine displaces 7.2 liters, impressive torque, phenomenal power and instant accelerator response. Part of the D7F engine series, it delivers maximum productivity and profitability every workday.
The D16A470 engines are direct injection, water cooled, 6 cylinder diesel in-line units specially designed for heavy commercial vehicles.
The D13B400 is a 13 liter, 6 cylinder EGR diesel engine with overhead camshaft, 4 valves per cylinder and unit injectors. Engine power 400 HP It meets the requirements of the EU Euro-4 standards for the level of toxicity of exhaust gases without preliminary cleaning.
The D13C500 engine is a 12.8 liter, 6-cylinder, in-line, overhead camshaft diesel engine with four valves per cylinder and pump injectors. Engine power & mdash; 500 h.p. The engine complies with the EU emission requirements of the Euro 5 standard.
The D16E580 engine is a 6-cylinder in-line diesel engine with a displacement of 16.1 liters, equipped with a turbocharger and an intercooler. Engine power 580 HP The engine complies with the EU emission standards Euro 4. The D16E580 is designed for heavy goods transport.
The D16G600 engine is a 6-cylinder in-line diesel engine with a displacement of 16.1 liters, equipped with a turbocharger and an intercooler. Designed for heavy freight transport. Its robust design features an overhead camshaft, 4 valves per cylinder and precision electronic fuel injection. Excellent driving characteristics are guaranteed by the maximum torque in a wide …
The D13A440 engine is a 6-cylinder diesel engine with a displacement of 12.8 liters. Its power is 440 hp. Designed for heavy freight transport, also suitable for construction work. It is based on a robust and reliable design with an overhead camshaft, 4 valves per cylinder and a precise electronic fuel injection system.
The D9A is an electronically optimized fuel-optimized turbo engine. Thanks to these parameters, the motors are highly efficient and economical. Engines of this family reach the highest power at low rpm, which helps to save consumables, reduce noise levels and longevity of the mechanism.
The Volvo D16G750 is a powerful 6-cylinder in-line engine with a turbocharger and an intercooler and a displacement of 16 liters. The D16G 750 engine has direct fuel injection. It uses a single cylinder head and overhead camshaft with 4 valves per cylinder and electronically controlled unit injectors.
The D13C460 engine is a 12.8 liter, 6-cylinder, in-line, overhead camshaft diesel engine with 4 valves per cylinder and unit injectors. The power of this engine is 460 hp. The engine also has low noise and exhaust emissions. Designed for the transportation of heavy loads over long distances and for construction equipment.