The 1.5-liter diesel Ford ZTDA (1.5 EcoBlue) was produced from 2018 to 2022 for the fourth-generation Focus and third-generation Kuga. It produces 120 hp and 300 Nm; the ZTDB version was made for the less strict Euro 5 standard.
1.5 EcoBlue family: Z2DA, Z2GA, Z2JA, Y9DA, ZTDA, ZTGA, ZTJA.
Specifications
| Production years | 2018-2022 |
| Displacement, cc | 1499 |
| Fuel system | Common Rail |
| Power output, hp | 120 |
| Torque output, Nm | 300 |
| Cylinder block | aluminum R4 |
| Block head | aluminum 16v |
| Cylinder bore, mm | 75 |
| Piston stroke, mm | 84.8 |
| Compression ratio | 16.4 |
| Features | DOHC |
| Hydraulic lifters | yes |
| Timing drive | belt and chain |
| Phase regulator | no |
| Turbocharging | Garrett GTD1244VZ |
| Recommended engine oil | 0W-20 |
| Engine oil capacity, liter | 4.0 |
| Fuel type | diesel |
| Euro standards | EURO 6d |
| Fuel consumption, L/100 km (for Ford Focus 2020) — city — highway — combined |
4.1 3.6 3.8 |
| Engine lifespan, km | ~300 000 |
| Weight, kg | 130 |
The engine was installed on:
- Ford Focus 4 (C519) in 2018 – 2022;
- Ford Kuga 3 (CX482) in 2019 – 2022.
Disadvantages of the Ford ZTDA engine
- The weak point of these PSA-designed diesels is the short chain between the camshafts: it stretches, and if this is missed, it breaks and the pistons hit the valves;
- Fitting the reinforced chain requires new camshafts, so the repair is expensive;
- The Bosch Common Rail system with piezo injectors is reliable but does not tolerate poor diesel;
- The particulate filter, EGR valve and NOx sensor cause a lot of trouble.
Frequently asked questions about the Ford ZTDA
How much power does the Ford ZTDA make?
The Ford ZTDA develops 120 hp and 300 Nm of torque.
How much oil does the Ford ZTDA take and which one?
Engine oil capacity: 4.0 liters. Recommended oil: 0W-20.
Does the Ford ZTDA have a timing belt or chain?
Timing drive of the Ford ZTDA: belt and chain.
Is the Ford ZTDA turbocharged?
Yes, the Ford ZTDA is turbocharged (Garrett GTD1244VZ).
Does the Ford ZTDA need valve clearance adjustment?
No, the Ford ZTDA has hydraulic lifters, so the valve clearances do not need to be adjusted.
How long does the Ford ZTDA last?
The typical lifespan of the Ford ZTDA is ~300 000 km with proper maintenance.
What is the fuel consumption of the Ford ZTDA?
Ford Focus 2020: city 4.1, highway 3.6, combined 3.8 L/100 km.
What cars was the Ford ZTDA installed on?
Ford Focus 4 (C519) in 2018 - 2022; Ford Kuga 3 (CX482) in 2019 - 2022.
What are the common problems of the Ford ZTDA?
The weak point of these PSA-designed diesels is the short chain between the camshafts: it stretches, and if this is missed, it breaks and the pistons hit the valves. Fitting the reinforced chain requires new camshafts, so the repair is expensive. All known problems.
