Honda J35A engine

Engine Honda J35A

In 1999, based on the J32 engine, Honda minders developed a new 3.5-liter J35A engine. It was based on a 235mm high V-block with six cylinders. The block had a forged crankshaft with a piston stroke of 93 mm and its compression height of 30 mm. The cylinder diameter was 89 mm. In addition, lightweight connecting rods with a length of 158.5 mm were present in the design. Also, in the design of the J35A engine, one can note the presence of only one camshaft (SOHC) in the cylinder head with 4 valves per cylinder and a system for changing valve timing and VTEC valve lift.

Specifications

Manufacturer Anna engine plant
Also called J35
Production years 1999
Cylinder block alloy aluminum
Fuel system injector
Configuration V
Number of cylinders 6
Valves per cylinder 4
Piston stroke, mm 93
Cylinder bore, mm 89
Compression ratio 9.4
10
10.5
11
11.2
11.5
Displacement, cc 3471
Power output, hp 210/5200
240/5400
243/5300
244/5750
248/5800
250/5700
248/5750
265/5800
272/6200
280/6200
286/6200
290/6200
310/6500
Torque output, Nm / rpm 310/4300
328/4500
332/3000-5000
325/4500
328/4500
343/4800
343/4500
340/3500
344/5000
343/5000
347/5000
369/4500
369/4500
Fuel type 95
Euro standards
Weight, kg
Fuel consumption, L/100 km (for Honda Pilot 3)
— city
— highway
— combined
14.3
8.2
10.4
Oil consumption, gr/1000 km up to 500
Recommended engine oil 5W-30 (up to 2003)
5W-40 (up to 2003)
10W-30 (up to 2003)
10W-40 (up to 2003)
5W-20 (2003-2013)
5W-30 (2003-2013)
5W-20 (2013+)
Engine oil capacity, liter 4.7 (up to 2003)
4.3 (2003-2013)
5.4 (2013+)
Oil change interval, km 10000
(better 5000)
Normal engine operating temperature, °C
Engine lifespan, km
— official information
— real

300+

Leave a Reply

Your email address will not be published. Required fields are marked *